 |
Read This First |  |
Setting Up the Machine on a Network
|
Using a Printer Server | |
Printing notification via SmartDeviceMonitor for Client
Setting Up as a Print Server (NetWare 3.x)
Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5)
Using Pure IP in the NetWare 5 / 5.1 or 6 / 6.5 Environment
Setting Up as a Remote Printer (NetWare 3.x)
Setting Up as a Remote Printer (NetWare 4.x, 5 / 5.1, 6 / 6.5)
|
Monitoring and Configuring the Printer | |
When user authentication is set
Access in the Administrator Mode
Displaying Web Image Monitor Help
Using SmartDeviceMonitor for Admin
Installing SmartDeviceMonitor for Admin
Changing the Network Interface Board Configuration
Locking the Menus on the Machine's Control Panel
Configuring the Energy Saver Mode
Viewing and Deleting Spool Print Jobs
Using SmartDeviceMonitor for Client
When Using IPP with SmartDeviceMonitor for Client
Printer Status Notification by E-Mail
Getting Printer Information over the Network
Understanding the Displayed Information
Configuring the Network Interface Board
|
Special Operations under Windows | |
Printing Files Directly from Windows
Using a Host Name Instead of an IPv4 Address
|
Appendix | |
When Using Windows Terminal Service / MetaFrame
Connecting a Dial-Up Router to a Network
When the optional IEEE 802.11b interface unit Is Installed
